KPL64502LDHF_EN
| Código EAN | 8595568937650 |
| Elcodigo aduanero | 39259080 |
| Peso | 0,0316 kg/pcs |
| Material | PP |
| Material libre de halógenos | yes |
| Material sin plomo | yes |
| Insonorización | yes |
| Autoextinguible | 30 s |
| Voltaje nominal | <= 400 V |
| Corriente nominal | <= 16 A |
| Resistencia térmica | -5 - 60 °C |
| Ensayo de hilo incandescente | 850 °C |
| Ancho | 138 mm |
| Altura | 68 mm |
| Profundidad | 50 mm |
| Diámetro de orificio fresado (perforado) | 68 mm |
| Recomendaciones del fabricante For all range of products in hollow walls, we recommend using the milling sets supplied by us. | |
| Clase de reacción al fuego | A1 - F |
| Distancia al unir dos cajas | 71 mm |
| Clase de protección | IP 30 |
| Corresponde a las normas | ČSN EN 60 670-1 |
| La descripción del embalaje the box is fitted with screws for fixing onto plasterboard and with instrument screws, pack loosely in a box | |
Halogen-free design of the double-injection hollow wall box for use in environments with increased need for protection of persons and property. For modern installations in composite frames. Distinctive rigidity and simple shape simplifies installation of devices. Inlet openings made of flexible material. Installation of the cable or pipe is done by pulling out the pre-moulded inlet on the flexible membranes and inserting the cable or pipe into the hole. The airtightness of the penetration is ensured even when the cable or pipe is inserted. Prevents air flow through the installation. Suitable for low-energy or passive houses. On the outside there are two pins marking the drilling points. The box meets the requirements for installations in soundproof walls with attenuation up to 69 dB. The mounting screws are double-tapped threaded for quick installation. Installation of the box in the wall opening is done by tightening the mounting screws. A box fitted with an appropriate cover or device with a rating greater than or equal to IP30 meets IP30. Protected by European industrial design. It is not necessary to countersink the edge of the plasterboard during installation.
